IntroPart removal should be drama-free. If you’re gouging your build surface or bending parts, try these safer, cleaner methods. Let temperature work for you Most parts loosen as the plate cools—wait a few minutes. On spring steel, flex the plate gently from the back. For glass, a razor scraper at […]
How to Remove 3D Printed Parts From the Bed Safely Read More »
IntroSupports are the scaffolding that hold up overhangs during printing—but they add cleanup and can scar surfaces. Smart design reduces or eliminates them, saving time and frustration. When supports are needed Overhangs beyond 45° from vertical Horizontal bridges longer than 5–10 cm Floating features with no lower contact Design strategies
How to Design 3D Prints with Supports in Mind Read More »
IntroMost 3D printable models arrive as STL files. Understanding what an STL is—and what it isn’t—helps you move from design to print with fewer headaches. What is an STL? STL = stereolithography Stores surface geometry as triangles No colors, materials, or print settings Where STL fits in the workflow Design
The Basics of STL Files in 3D Printing Read More »
IntroMoisture is filament’s enemy. Wet filament causes popping, stringing, and weak prints. Good storage keeps it dry and ready to go. Dry storage options Sealed plastic bins with gasket lids Vacuum bags with desiccant packs Dedicated filament dry boxes Active drying Food dehydrator or filament dryer at 45–60 °C Dry
Best Ways to Store 3D Printer Filament Read More »
IntroUnder-extrusion shows up as thin walls, gaps, or weak layers. It’s one of the most common problems—and usually easy to solve. Common causes Clogged or partially blocked nozzle Worn PTFE tube or extruder gears Incorrect E-steps calibration Low print temperature Moist filament Quick checks Mark and measure filament for E-steps
Troubleshooting Under-Extrusion Issues Read More »
