io3dprint’s Epic 3D Printer Comparison Table
When shopping for a new 3D printer there are so many different manufacturers, models, and specs to compare, it can be a bit daunting.
My 3D printer comparison chart will help you sort through all the important specs of hundreds of 3d printers and make comparing models much easier.
I’ve included all 3D printer categories. From entry-level 3D kit printers through to ready assembled desktop 3D printers and all the way up to professional and industrial 3D printers.
For every model I’ve review there’s a button that will take you straight to my review.
And if I have a discount code this will be shown in the table too, so you can be sure you’re getting the best deal on your new pride and joy.
If you have any questions or suggestion then shoot me a message using my contact page.
-Dylan
| wdt_ID | Manufacturer | Model | Type | Kit or Assembled | Filament Type | Filament Size | Speed | Max. build size | Min. layer thickness | Heated Bed | Dual or Single Extruder | Connectivity | HEPA Filter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | ACED | 3D Printer | FFF | KIT | PLA/ABS/Other Plastics | 1.75mm | 20 - 60 mm/s | 305 x 305 x 320mm | 0.2 mm | Yes | Single | USB | No |
| 2 | ADIMLab | Gantry 3D Printer | FFF | ASSEMBLED | PLA | 1.75mm | 120 mm/s | 310 x 310 x 410 mm | 0.05 - 0.3 mm | Yes | Single | SD card or USB | No |
| 3 | Afinia | H+1 | FFF | ASSEMBLED | PLA/ABS/Flexi/Other | 1.75mm | 200 mm/s | 255 x 205 x 225 mm | 0.05 mm | Yes | Single | USB, WiFi, LAN | Yes |
| 4 | Afinia | H800+ | FFF | ASSEMBLED | PLA/ABS | 1.75mm | 200 mm/s | 244 x 205 x 205 mm | 0.1 mm | Yes | Single | USB, WiFi | Yes |
| 5 | Afinia | H400+ | FFF | ASSEMBLED | PLA/ABS | 1.75mm | 90 mm/s | 120 x 120 x 120 mm | 0.15 mm | Yes | Single | USB, WiFi | Yes |
| 6 | Alfawise | U30 | FFF | KIT | PLA/ABS | 1.75mm | 120 mm/s | 220 x 220 x 250mm | 0.1 - 0.4 mm | Yes | Single | TF card,USB | No |
| 7 | Alfawise | U20 | FFF | KIT | PLA/ABS | 1.75mm | 20 - 150mm / s | 300 x 300 x 400mm | 0.1 - 0.4 mm | Yes | Single | SD card | No |
| 8 | Alunar | Prusa i3 DIY | FFF | KIT | PLA/ABS | 1.75mm | 100 mm/s | 220 × 220 × 230 mm | 0.1 mm | Yes | Single | SD Card | No |
| 9 | Anet | A8 | FFF | KIT | PLA/ABS/Other Plastics | 1.75mm | 100 mm/s | 220 × 220 × 240 mm | 0.1 mm | Yes | Single | SD Card | No |
| 10 | Anet | A6 | FFF | KIT | PLA/ABS/Other Plastics | 1.75mm | 120 mm/s | 220 × 220 × 250 mm | 0.1 mm | Yes | Single | SD Card | No |
