This page may contain affiliate links. As an Amazon Associate I earn from qualifying purchases.
Review: Anet ET4 3D Printer
ANET ET4
Summary
The fact that you can use the Optional Trinamic Motor Drivers to control the noise levels gives this printer a competitive advantage over its nearest 3D printer rivals. The large 2.8 touchscreen makes it a pleasure to use.
The ET4 is an impressive package and worthy of consideration at his price point.
Introduction
3D printing is rapidly gaining popularity across the globe. This advanced technology enables you to create your own three-dimensional objects using your computer and a moderately priced 3D printer. One of the latest products on the market is the Anet ET4 3D Printer.
Both online and regular stores are being flooded with a wide range of 3D printing devices. It can be rather confusing to choose the best model from the vast range of available designs.
The Anet ET4 is a great 3D printer that produces high-quality 3D prints. This is a modern design of printer with incredible printing capabilities. The all-metal construction is the first impressive structural attribute that you will notice when you open it.
The electronics are hidden conveniently underneath in a sheet metal control box. The 2.8-inch touchscreen interface makes it very simple to control all your 3D printing operations. You will also be impressed with the budget-friendly price. This is a bargain for a 3D printer that performs extremely well.
Here are all the details you need to know before purchasing the ANET ET4 3D printer.
Specification
- Build volume:220 x 220 x 250 mm
- Feeder system: Bowden
- Hot end temperature (Max):250 ℃
- Heated bed temperature (Max):100 ℃
- Nozzle size: 0.4 mm
- Print bed material:Glass
- Print Head: Single nozzle
- Connectivity: USB, SD Card, Ethernet
- Print recovery: Yes
- Filament sensor: Yes
- Frame: Aluminum
- Camera: No
- Bed leveling: Automatic
Features
The Anet ET4 3D Printer has a wide range of impressive features. Here are just a few of them:
The Filament Detection Sensor
The filament enters two systems before reaching the Bowden extruder. The filament run-out sensor alerts you to add new material, and the second one transports the filament to the extruder.
The Anet ET4 is one of the best performing 3D printers currently on the market. It is very precise in detecting when another filament is required and alerts you when more is needed.
With this printer, you don’t have to worry about power failures, as it saves print progress if a power failure occurs.
You are free to use the optional Trinamic Motor Drivers
These drivers are very important in stabilizing the printing systems. You will like the fact that you can print at full speed, yet the system is almost silent.
The 2.8-inch Touchscreen interface
This device makes it very simple for you to fine-tune the settings through its super responsive touchscreen interface. You can easily regulate the fan’s speed and the printing temperature.
Advantages
- An outstanding design
- Remarkable prints
- Helpful customer service
- It is almost silent when you use the required software
- Easy assembly
- Saves time and effort
Disadvantages
- Customer service can be slow to respond, although ultimately helpful
Unboxing & Box Contents
The first step is to unbox the contents. You will like the intuitive arrangement of the parts upon opening the box. You will also notice that there are only a few parts, and the manufacturer arranges them in three distinct segments.
You need to be cautious with the screws as they are very important in the assembly process. Make sure that you do not lose any whilst opening the box.
The fully metal frame is very robust, and this demonstrates the stability aspect of the printer, as well as its durability. The strong metal frame also ensures that vibrations from the printer are kept to a minimum.
There are also some valuable instructions that you need to follow. Don’t take them for granted, since they are crucial to ensure the safe assembly and optimum working of the printer.
It is important to remember that the setting up and the generation of your first prints is quite simple. All you need to do is follow the instructions systematically and correctly.
You need to refer to the manual to confirm that all the required parts are in the box. A complete package will consist of all the above-mentioned parts, as well as the filament run-out detection sensor, the heater, temperature sensor, and many more.
Setup
Setting up this printer is a relatively simple process. You are ready to go, provided you understand how to do the bed leveling and the filament installation.
The first thing that you need to do is adjust the bed until it is at an appropriate level. You can do this manually by adjusting the carriage downwards. Move it until quite a minimal space is left between the nozzle and the print plate. You may opt for a piece of paper to measure the right distance.
Use the adjustable spring bolt mechanism to fine-tune the distance from the bed to the nozzle. Loading the filament is slightly complicated. You need to be very careful when inserting the filament through the extruder. This always needs to be done manually.
The filament path is very detailed; the sophisticated nature of this printer brings lots of benefits to the user. For example, when the filament runs out, the filament detector will alert you immediately to ensure that the printing job is not interrupted. It allows you to pause the system and change the materials, so you will never lose any print.
You also need to know how to operate the control panels since this is where most of the essential operations take place. The target temperature needs to be set appropriately to achieve the best 3D print results. The correct setting will have the extruder gradually fill all the filament through to the printer’s nozzle.
Software
The Optional Trinamic Motor Drivers are quite affordable. These are very important in stabilizing the system. Most of us want to print at high speeds with minimal noise levels. These drivers will help you print with an almost silent system. The low noise feature is a key feature in this printer in comparison to the high noise level of similar 3D printers on the market.
In Use
The Anet ET4 3D Printer is simple to assemble since all you need to do is follow the manufacturer’s video and instruction sheet provided. The accompanying video also explains the auto-leveling process, which is quite straightforward to follow.
The filament run-out detection sensor is advantageous and will save you a lot of time and resources. However, if it is found to be defective, it can be rather disappointing.
The Anet ET4 3D Printer is associated with minimal noise provided you are working with the correct software. The Optional Trinamic Motor Drivers are known to make the device function almost silently.
Verdict
This article has outlined the main features of the Anet ET4 3D Printer. This printer is definitely a significant investment and offers you a sophisticated 3D printer with great value for your money. There are so many superb features in this printer that you will benefit from, such as the filament run-out sensor, which will save you a lot of time and money.
The fact that you can use the Optional Trinamic Motor Drivers to control the noise levels gives this printer a competitive advantage over its nearest 3D printer rivals. The large 2.8 touchscreen interface ensures you can carry out your operations smoothly.
This printer is about effortless operations and remarkable print quality. Order the impressive Anet ET4 3D Printer today to enjoy the very best in 3D printing.
Last update on 2024-09-25 at 04:49