This page may contain affiliate links. As an Amazon Associate I earn from qualifying purchases.
Eryone Thinker SE Full Review – Is This The Best Mid-level 3D Printer on the Market?
Choosing a 3D printer is not as easy as it used to be. Today, there are so many printers out there, each offering its unique features. Going through all the different models and deciding what works for you can be a bit of a challenge.
However, there are a few 3D printers that truly stand out, and the Thinker SE is one of them. A highly durable and well-built mid-level printer, this unit offers an array of incredible features. The Thinker SE is our focus in this review.
We will be looking at some of the features it offers its pros and cons, a few specs, and offer you additional info on setting up and use. Eventually, we hope that this info helps you make an informed choice.
- Printing Technology: Fused Filament Fabrication (FFF)
- Build Volume: 300 mm x 300 mm x 400 mm
- Print Precision: 0.05 mm
- Filament Diameter: 1.75 mm
- Nozzle Diameter: 0.4 mm
- Printer Speed: 30 mm/second
- Supported Filament: PLA, TPU, PETG
- Slicer Software: Cura, Simplify3D, Repetier Host, and others
- Supported OS: Windows, Mac, and Linux
- Connectivity: USB and MicroSD
- Maximum Nozzle Temperature: 250 Degrees Celsius
- Maximum Bed Temperature: 100 Degrees Celsius
- Printer Size: 510 mm x 415 mm x 652 mm
- Printer Weight: 9.3 Kilograms
The Thinker SE also comes with some amazing features. We have highlighted some of the most notable ones here below for you.
- The Thinker SE is an easy-to-assemble printer that, according to the manufacturer, should be up and running within 15 minutes. The base and the gantry on this unit come already preassembled, so there is very little to do here during setup.
- You also get a super large build plate that lets you print large objects with ease. The build plate also features carefully selected components to enhance print accuracy and speed.
- And speaking of speed, the Thinker SE is one of the fastest printers in its category. This makes it possible to perform large volume printing without taking too much time.
- The unit is also super quiet. It comes fitted with TMC2208 stepper drivers and additional quiet fans that help decrease noise. According to the manufacturer, the average operational noise produced by the Thinker SE is 49 Decibels.
- The unit also offers a print resume feature that protects your printing against accidental power failure or printer shutdown.
- The Thinker SE also has an auto-leveling feature that ensures the first-time setup and use is as easy as possible.
- You will also love that the unit features a sturdy and well-built metal design that will last for years. The metal design also enhances printer stability which plays a key role in print quality.
- The Thinker SE also delivers fast heat dissipation on the bed, with maximum bed temperature reaching as high as 100 degrees Celsius. This helps with curing and overall print quality.
- Extra-large build volume that allows users to print larger objects without too many issues
- Sturdy design with a durable metal frame for extra longevity and added printer stability
- Quick set up and automatic bed leveling for easy and quick set up
- Amazing value for money, especially when you consider the features
- It comes with a textured glass plate, and while it is strong, there is always the risk of breaking
- The instruction’s manual that comes inside the box is too difficult to follow, even for experienced 3D printers
- Some users have also had issues using the MicroSD card to print
- The nozzle clogs very easily and will require regular cleaning to maintain optimum performance.
- The filament run-out feature is not included
Unboxing and Box Content
The Thinker SE ships in a large cardboard box and is protected with dense foam padding. Even though the box looks a bit bulky, it is surprisingly light. You will also notice that there are a lot of goodies inside there too.
First, when you open the box, you will be greeted by a full user manual and a quick start guide that should help you set up this unit. The manufacturer includes a checklist in there as well of all the things you should get in the box. This is important in keeping track of all items.
The Thinker SE ships already preassembled. That’s why you will find the printer base and the gantry neatly tucked inside the box, taking all the space. Don’t also forget to check out the toolbox. It has a lot of stuff, too, including some scrappers, snipers, a wrench, Allen keys, and the screws you will need for set up.
At the bottom of the box, you will get a roll of test filament, too, and a MicroSD card. The textured glass bed is also included in the box.
The Thinker SE is such an easy printer to set up. This is because the unit ships already preassembled. The first thing to do here is to attach the gantry to the printer base. It takes only four screws to do it, and thanks to the quick start guide provided by the manufacturer, you should be able to get this done in just a few minutes.
Additionally, you may want to make sure that all loose screws are tightened. Typically, most printers ship when screws are a little bit loose. As for the Thinker SE, we noticed the screws attaching the fan to the printer need to be tightened, so check them out.
The Thinker SE is compatible with a host of third-party slicer software, including Cura, Simplify3D, Repetier host, and others. We did not see any reviews from users having any issues with the slicers. The unit will also work on Windows, Mac, and Linux.
The Thinker SE is a large printer with a large build volume. But it is surpassingly quiet thanks to its TMC 2208 stepper drivers. According to the manufacturer, the printer produces roughly 49 decibels of noise, making it one of the quietest 3D printers out there.
The print quality achieved is also not that bad. However, you need to be very careful when leveling the bed. We noticed that there are a lot of people out there who complain about inferior print quality. But more often than not, this has nothing to do with the printer but poor setup.
If, for some reason, you don’t get good print quality, go over the printer setup again and make sure you have done it right. Other than that, the Thinker SE should offer very high-quality prints, and the great news is that it’s also very fast.
With all its unique features and an array of benefits, one area where the Thinker SE falls short is customer support. While there aren’t many reviews on Amazon talking about support, the few that we found did not have anything positive to say. Some users noted that it took days to hear back from the support team, while others never heard back at all.
The Thinker SE is no doubt one of the best mid-level 3D printers out there. It offers such incredible value for money thanks to all the fantastic features it has to offer. For starters, the unit comes with a large build volume and a sturdy metal design that should last ages.
The print quality is also quite good plus you also get a well build glass bed that can hit maximum temperatures of up to 100 Degrees Celsius. The Thinker SE also has a print resume feature. It produces less than 50 Decibels of noise, too, making it one of the quietest printers out there.
But despite these excellent pros, there are some shortcomings to keep in mind. For instance, the support sucks, and Thinker SE should do better. We also noticed some complaints that the nozzles on this unit clog too easily. You won’t also get a filament run-out detection feature, and the Thinker SE may seem a bit bulky for some people.
However, even with these flaws, the Thinker SE still delivers impeccable value. It is designed for people looking for a large and solid printer that delivers outstanding print quality. Give it a shot; you won’t regret it!
Last update on 2023-06-03 at 07:44
1 thought on “Review: Eryone Thinker SE”
Came across this review when I was trying to find answers about my Thinker SE. I can confirm that the support is very lacking; mine had absolutely TERRIBLE Y-Axis wobble out of the box. Upon disassembling the print plate, I discovered that the wheels are bolted directly into the under-plate, not with eccentric screws, so they cannot be tightened against the rails. The rails themselves are bolted in 2 places each, and riveted in another 2, making them impossible to adjust also. Yes, this all makes it incredibly sturdy, but if it’s misaligned from the factory then you are left with a $500 paperweight. There is precious little information on the internet about this model, it seems Creality printers are the way to go for support (as there are thousands of people who have answers, not because the company provides any better support).